| Britec MN |
Gelcoat based on ISO / NPG resins |
- High resistance to yellowing and chemical resistance.
- Resistance to blistering.
- High covering power due to its high level of solids.
|
| Polymet 93203-06 |
Isophthalic unsaturated polyester resin |
- Excellent retention of mechanical properties at elevated temperatures.
- Very low water absorption.
- Excellent wettability of fiberglass.
- Reduction of bubbles during lamination.
- Increased resistance to yellowing due to UV exposure.
|
| Polymet I-504 |
Unsaturated polyester resin blend — isophthalic with neopentylglycol |
- Excellent resistance to hydrolysis.
- Excellent wettability of the fiberglass during application.
- Reduction of the possibility of bubble permanence during lamination.
- Increased resistance to yellowing due to UV exposure.
|
| Akperox A 50 |
Methyl ethyl ketone peroxide |
- High content of active oxygen which allows a better curing cycle even at low temperatures.
|
| Surface veil |
Made with type E glass |
- Increases chemical and weather resistance.
- Strong reduction of fiberglass mapping.
- Increases abrasion resistance.
- Excellent wetting by the resin.
|
| Graco Machines |
Gelcotera and Sprinkler |
- Easy to operate.
- Training and preventive maintenance service.
|
| Wick 2400 Tex |
Made with type E glass |
- Good wettability.
- Easy to accommodate during the lamination process.
|
| Coremat |
Fabric composed of polyester fibers with 50% of microspheres |
- Superior impact resistance.
- Increases thermal insulation.
- Lower weight.
- Rigidity/weight ratio 200–300% higher than conventional laminates.
|
| Mat 300 y 450g/m2 |
Made with type E glass |
- Higher isotropic properties.
- Good wetting and excellent moldability.
|
