| Britec MN |
Gelcoat based on ISO / NPG resins |
- High gloss surface.
- High resistance to yellowing and chemical resistance.
- Resistance to blistering.
- High coverage power due to its high solids content.
|
| Britec Guard |
Chemical barrier based on special Vinyl Ester resins |
- Improves the cosmetic quality of the final part (no glass print-through).
- Enhances blistering resistance.
- Helps to visualize bubbles during lamination.
|
| SW 901 |
Vinyl Ester based resin |
- Improves the cosmetic quality of the final part (no glass print-through).
- Enhances blistering resistance.
|
| Polymet DC 141 |
High-solids DCPD base resin |
- Excellent curing cycle.
- High solids level, generating low shrinkage and a better cosmetic finish of the part.
- Reduced gas emissions during application.
|
| Akperox A 50 |
Methyl ethyl ketone peroxide |
- High active oxygen content, allowing a better curing cycle even at low temperatures.
|
| Graco Machines |
Gelcoat and Sprayer |
- Easy to operate.
- Training and preventive maintenance service.
|
| Roving 400 TEX |
Made with type E glass |
- Good wettability.
- Easy to accommodate during the process.
|
| Coremat |
Fabric made of polyester fibers with 50% microspheres |
- Superior impact resistance.
- Increases thermal insulation.
- Lighter weight.
- Stiffness/weight ratio 200–300% higher than conventional laminates.
|
| Airex |
PVC foam with different densities for closed molding process |
- Replaces HoneyComb cores at a lower cost.
- Self-extinguishing.
- Achieves high mechanical properties.
|
| Baltek |
Balsa wood for closed molding process |
| Mat 300 and 450g/m² |
Made with type E glass |
- Higher isotropic properties.
- Good wetting and excellent moldability.
|
