| Britec Tooling |
Gelcoat based on Vynil Ester type resins |
- The mold has a high gloss surface.
- Preservation of gloss, maintained throughout the life of the mold.
- High thermal resistance (HDT) obtaining molds that do not deform.
- Abrasion resistance reducing the possibility of mold damage.
|
| SW 901-3 |
Bisphenol A Epoxy Resin Vynyl Ester |
- Excellent retention of mechanical properties at elevated temperatures.
- Very low water absorption.
- Excellent wettability of the fiberglass during application.
- Reduction of bubbles during lamination.
- Greater resistance in contact with chemical products.
|
| Akperox A 50 |
Methyl ethyl ketone peroxide |
- High content of active oxygen which allows a better curing cycle even at low temperatures.
|
| InColors |
Pigmented paste |
- High pigment concentration and yield.
- High fineness, homogeneous coloring and no pigment separation or flotation.
- Resistance to chemical attack.
- Resistance to decomposition by UV exposure.
|
| Wick 1100, 2200 and 4400 Tex |
Made with type E glass |
- Good wettability.
- Easy to accommodate during the lamination process.
|
| Surface veil |
Made with type E glass |
- Improved surface finish results.
- Improved impact resistance, abrasion and chemical resistance.
- Increases durability.
|
| Mat 300 y 450g/m2 |
Made with type E glass |
- Higher isotropic properties.
- Good wetting and excellent moldability.
|
